 | 
 | |
| Sto AAC Base Coat SC - 400
Sto AAC Base Coat SC is a one-component, polymer modified, cement base coat for use on AAC (Autoclaved Aerated Concrete) substrates.
Material Safety Data Sheet
Product Bulletin
| |
| Sto AAC Base Coat TC - 403
Sto AAC Base Coat SC is an acrylic-based material used as a base coat over AAC (Autoclaved Aerated Concrete) substrates. It is a two component product to be combined with Portland Cement.
Material Safety Data Sheet
Product Bulletin
| |
| Sto AAC Finishes - 406, 407, 408, 409
Sto AAC Finish is a ready-mixed, flexible textured wall finish used as a decorative and protective wall finish over prepared vertical, above grade, exterior AAC (Autoclaved Aerated Concrete) substrates.
Material Safety Data Sheet - 406 Fine
Material Safety Data Sheet - 407 Medium
Material Safety Data Sheet - 408 Swirl
Material Safety Data Sheet - 409 Freeform
Product Bulletin
| |
| Sto AAC Mesh - 401, 402
Sto AAC Mesh is a specially designed, coated glass fiber fabric used for reinforcement of AAC (Autoclaved Aerated Concrete) substrates with Sto AAC base coat.
Material Safety Data Sheet - 401
Material Safety Data Sheet - 402
Product Bulletin
| |
| Sto Acrylic Urethane Sealer - CR514
Sto Acrylic Urethane Sealer is a two component acrylic/urethane based topcoat sealer. Use it to protect Sto Decocoat, Sto TextureCoat, stamped concrete and exposed aggregate concrete.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Armor Mat - 921
Sto Armor Mat is specially designed coated glass fiber fabrics used for impact resistance in Sto Claddings, including StoTherm™ NExT.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Armor Mat XX - 922
Sto Armor Mat XX is specially designed coated glass fiber fabrics used for impact resistance in Sto Claddings, including StoTherm™ NExT.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Bonding Agent and Admixture - CR245
Sto Bonding Agent and Admixture is an acrylic latex for bonding new concrete, mortar or StoPowerwall™ Stucco to hardened concrete. It can also be used as an admixture in fresh concrete, mortar and StoPowerwall™ Stucco to increase adhesion and durability.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Bonding and Anti-Corrosion Agent - CR246
Sto Bonding and Anti-Corrosion Agent is a unique combination of Portland cement, microsilica, epoxy, and acrylic resin. Use it for bonding new concrete or mortar to old and for protecting reinforcing steel against rust and corrosion. When used as a bonding agent, it provides up to a 24-hour open time
Material Safety Data Sheet
Product Bulletin
| |
| | |
| Sto BTS® Plus - 727
Sto BTS® Plus is a one-component, polymer-modified, cement based material used as an adhesive and base coat in Sto Insulated Wall Claddings, including StoTherm Classic NExT™ and StoTherm Premier NExT™. It is specially designed to provide for the recommended minimum 1/16" base coat thickness in a single application.
Material Safety Data Sheet
Product Bulletin
| |
| Sto BTS® Silo - 727Silo
Sto BTS® Silo is a one-component, polymer-modified, cement based material used as an adhesive and base coat in Sto Insulated Wall Claddings, including StoTherm™ NExT. It is specially designed for use with StoSilo system equipment, which mixes, pumps, and sprays Sto BTS® Silo.
Material Safety Data Sheet
Product Bulletin
| |
| Sto BTS®-NC - 718
Sto BTS®-NC is a one-component, polymer-modified, cement based material used as an adhesive and base coat in Sto Systems II-NC, Plus 1, Plus 1-RS and Sto Insulated Wall Claddings. It meets CAN4-S114 test requirements as non-combustible.
Material Safety Data Sheet
Product Bulletin
*** Sto Canada Only. This product is not available for sale in the US ***
| |
| Sto BTS FastSet - 728
Sto BTS Fast Set is a fast setting, one-component, polymer modified, cement-based material used as an adhesive and base coat in Sto Cladding Systems, including StoTherm Classic NExT™ and StoTherm Premier NExT™. It is specially designed to provide for the recommended minimum 1/16" (1.6 mm) base coat thickness in a single coat application.
Material Safety Data Sheet
Product Bulletin
7b
| |
| Sto Clear Coat Sealer - CR512
Sto Clear Coat Sealer is an acrylic based exterior/interior topcoat sealer. Use it to protect Sto Decocoat, Sto GraniText, Sto Texture Coat, stamped concrete and exposed aggregate concrete.
Material Safety Data Sheet
Product Bulletin
| |
| StoCoat™ Acryl - 201
New name! Previously Sto Maxicryl - 201
StoCoat Acryl™ is an acrylic-based interior and exterior wall coatings. This products are used over prepared vertical concrete, masonry, plaster/stucco and acrylic textured finishes. It has unique characteristics to satisfy virtually any architectural need.
Material Safety Data Sheet
Product Bulletin
| |
| StoCoat Acryl Medium - 657
New name! Previously Sto Textured Concrete Coating Medium - 657
StoCoat Acryl Medium is an acrylic-based protective finish. Use it over horizontal concrete surfaces exposed to pedestrian traffic, such as balconies, decks and walkways. It protects against weather and environmental pollutants. It is specifically formulated for skid resistance and color retention. Apply it over Sto Watertight Coat to achieve a highly durable, aesthetically pleasing waterproof deck finish system for concrete and masonry substrates.
Material Safety Data Sheet
Product Bulletin
| |
| StoCoat™ Acryl Plus - 648
New name! Previously Sto Protective Concrete Coating - CR648
StoCoat Acryl Plus is an acrylic-based coating that protects against weather, salts and environmental pollutants. Use it for protecting vertical or horizontal concrete, stucco, EIFS, masonry, or previously acrylic coated surfaces. It comes in a variety of colors, and has a semi-gloss sheen, making it an easy way to improve a substrate’s appearance.
Material Safety Data Sheet
Product Bulletin
| |
| StoCoat™ Color - 202
New name! Previously Stocryl - 202
StoCoat Color is an acrylic-based interior and exterior wall coating that protects against weather, salts, and environmental pollutants.
Use it to protect vertical concrete, masonry, plaster/stucco, EIFS and previously acrylic-coated wall surfaces.
Material Safety Data Sheet
Product Bulletin
| |
| StoCoat™ Color Sand - 230
New name! Previously Sto Concrete Coating Sand - 230
StoCoat Color Sand is an acrylic-based interior and exterior wall coatings. This products are used over prepared vertical concrete, masonry, plaster/stucco and acrylic textured finishes. It has unique characteristics to satisfy virtually any architectural need.
Material Safety Data Sheet
Product Bulletin
| |
| StoCoat Lotusan® - 216
StoCoat Lotusan® is a smooth, verticle, above grade exterior wall coating with BIONICSTM technology that mimics the self cleaning capabilities of the lotus leaf.
Material Safety Data Sheet
Product Bulletin
Product Brochure
| |
| | |
| Sto Concrete Coating Smooth - 232
Sto Concrete Coating Smooth is an acrylic-based interior and exterior coating. This product is designed to perform as a block filler/primer in exterior or interior applications.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Corner Mat - 921A
Sto Corner Mat is specially designed coated glass fiber fabrics used for impact resistance in Sto Claddings, including StoTherm™ NExT.
Material Safety Data Sheet
Product Bulletin
| |
| StoCreativ™ Granite - 173
StoCreativ™ Granite ia an acrylic-based interior and exterior wall finish, formulated for durability and low maintenance for new construction or renovation. It is trowel-applied and designed to give the look of cut or polished granite, but in a versatile, lightweight finish coating.
Material Safety Data Sheet
Product Bulletin
| |
| | |
| Sto Decocoat - 119
Sto Decocoat is a ready-mixed, decorative and protective wall and floor coating composed of fine variegated aggregate encased in a pure acrylic binder. Sto Decocoat is used as an interior or exterior coating over prepared concrete, masonry, plaster or drywall surfaces.
Material Safety Data Sheet
Product Bulletin
| |
| | |
| Sto DecorTex® - 204
Sto DécorTex® is an acrylic-based texturing interior wall coating system. Sto DécorTex® is available in a wide range of colors. It is used as an interior coating system over prepared gypsum wallboard surfaces.
Material Safety Data Sheet
Product Bulletin
Sales Sheet
| |
| Sto Detail Mesh - 919
Sto Detail Mesh is specially designed coated glass fiber fabrics used for impact resistance in Sto Claddings, including StoTherm™ NExT.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Dispersion Adhesive - 829
Sto Dispersion Adhesive is a ready-mixed acrylic-based adhesive. Sto Dispersion Adhesive is used to attach Sto Insulation Board to prepared concrete, masonry or sheathing substrates in Sto Insulated Wall Claddings, including StoTherm™ NExT.
Material Safety Data Sheet
Product Bulletin
| |
| Sto EmeraldCoat® - 264
Sto EmeraldCoat® is a ready-mixed flexible waterproofing coating specially formulated for use behind Portland cement stucco. It is applied directly to wall sheathing and functions as a vertical above grade waterproofing/air barrier when combined with Sto Gold Fill® and StoGuard™ Mesh.
**New Formulation - Now sprayable through airless machines!
Material Safety Data Sheet
Product Bulletin
| |
| | |
| Sto Essence DPR Medium Sand Finish - 306
Sto Medium Sand Finish is a ready-mixed, acrylic-based exterior or interior textured finishes used as a decorative and protective wall coatings over prepared masonry and plaster substrates and in Sto’s Essence Claddings, including StoTherm Essence NExT™.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Essence DPR Swirl Finish- 307
Sto Swirl Finish is a ready-mixed, acrylic-based exterior or interior textured finishes used as a decorative and protective wall coatings over prepared masonry and plaster substrates and in Sto’s Essence Claddings, including StoTherm Essence NExT™.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Essence DPR Fine Sand Finish - 310
Sto Fine Sand Finish is a ready-mixed, acrylic-based exterior or interior textured finishes used as a decorative and protective wall coatings over prepared masonry and plaster substrates and in Sto’s Essence Claddings, including StoTherm Essence NExT™.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Extended Full-Depth Repair Mortar CI - CR311CIX
Sto Extended Full-Depth Repair Mortar with integral corrosion inhibitor is a single-component cement based mortar for structurally repairing or overlaying deteriorated concrete. Use on horizontal surfaces for repairs from 1 1/2 inches (38 mm). It has been pre-extended using kiln dried uniform pea gravel to allow for deeper applications. Its formula provides increased strength gain and improved performance for repair applications.
Material Safety Data Sheet
Product Bulletin
| |
| | |
| Sto Fiber-Reinforced Shotcrete - CR306
Sto Fiber-Reinforced Shotcrete is a durable, cement-based, dry-process shotcrete mortar for structurally repairing deteriorated concrete. It has been modified with microsilica and fiber for superior physical strengths. Use it on vertical or overhead surfaces for repairs greater than 1/2 inch (12 mm).
Material Safety Data Sheet
Product Bulletin
| |
| Sto Flexfinish - 247
***For sale in NM & AZ only***
Sto Flexfinish is a ready-mixed, elastomeric textured wall coating used as a decorative and protective wall coating over prepared concrete, masonry and plaster/stucco substrates.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Flexfinish - 236
***For sale in NM & AZ only***
Sto Flexfinish is a ready-mixed, elastomeric textured wall coating used as a decorative and protective wall coating over prepared concrete, masonry and plaster/stucco substrates.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Flexfinish - 249
***For sale in NM & AZ only***
Sto Flexfinish is a ready-mixed, elastomeric textured wall coating used as a decorative and protective wall coating over prepared concrete, masonry and plaster/stucco substrates.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Flexible Crack Filler - CR214
Sto Flexible Crack Filler is an acrylic-based, non-sag crack filler for sealing and weatherproofing cracks. Use it to fill hairline cracks in vertical concrete, stucco or masonry block surfaces. Its convenient cartridge packaging provides a fast way to fill cracks, up to 1/8-inch wide.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Flexible Skim Coat - CR213
Sto Flexible Skim Coat is an acrylic-based surface leveler and ground coat that weatherproofs and bridges cracks. Use it for leveling and weatherproofing vertical above-grade concrete, stucco or masonry block surfaces. It provides a fast way to seal cracked surfaces when there are too many cracks to fill individually.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Flexyl - 235
Sto Flexyl is an acrylic-based, fiber reinforced, flexible waterproofer. When combined with Portland cement, Sto Flexyl provides multiple functions, including; waterproof adhesive and base coat in Sto Insulated Wall Claddings, crack repair material as well as a foundation waterproofer.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Flowable Mortar - CR730
Sto Flowable Mortar is a polymer-modified, cement-based mortar for structurally repairing deeply deteriorated concrete. Use with form-and-pour or form-and-pump repairs from 1/2 to 2 inches (12 mm to 51 mm) or extend it with aggregate for deeper applications.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Full-Depth Repair Mortar CI - CR311CI
Sto Full-Depth Repair Mortar with integral corrosion inhibitor is a single-component cement based mortar for structurally repairing or overlaying deteriorated concrete. Use on horizontal surfaces for repairs from 1/2 to 4 inches (12 to 102 mm) or extend it with aggregate for deeper applications. Its formula provides increased strength gain and improved performance for repair applications.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Gold Coat® - 265
Sto Gold Coat® is a ready-mixed flexible waterproofing coating for use under adhesive wall claddings such as EIFS. It is applied directly to vertical above grade wall sheathing and functions as a waterproofing/air barrier when combined with Sto Gold Fill® and StoGuard™ Mesh.
**New Formulation - Now sprayable through airless machines!
Material Safety Data Sheet
Product Bulletin
| |
| Sto Gold Fill® - 266
Sto Gold Fill® is a ready-mixed, flexible, joint compound, air barrier material. It is applied with StoGuard™ Mesh to rough openings and sheathing joints in walls.
Material Safety Data Sheet
Product Bulletin
| |
| Sto GraniTex - 171
Sto GraniTex is an acrylic-based interior and exterior wall finish, formulated for durability and low maintenance in new construction and renovation. Sto GraniTex is spray applied and available in a range of color combinations designed to look and feel like natural stone. Sto GraniTex may be used as a finish coating in Sto’s Classic Claddings, including StoTherm Classic NExT™.
Material Safety Data Sheet
Product Bulletin
| |
| StoGuard™ Mesh - 267 & 268
StoGuard™ Mesh is a glass fiber self adhesive mesh for use with Sto Gold Fill®.
MSDS for StoGuard™ Mesh 4.25" - 267
MSDS for StoGuard™ Mesh 9.5" - 268
Product Bulletin
| |
| StoGuard™ Fabric - 207 & 208
StoGuard™ Fabric is a non-woven cloth reinforcement. It is part of the StoGuard assembly and is used with either Sto Gold Coat or Sto EmeraldCoat to treat sheathing joints, inside and outside corners and rough openings.
MSDS for StoGuard™ Fabric 6" - 207
MSDS for StoGuard™ Fabric 4" - 208
Product Bulletin
| |
| StoGuard™ RediCorner™ - 209
StoGuard RediCorner is a preformed fabric piece used in the corners of rough openings for quicker installation. It is part of the StoGuard assembly and is used with either Sto Gold Coat or Sto EmeraldCoat to treat sheathing joints, inside and outside corners and rough openings.
MSDS for StoGuard RediCorner - 209
Product Bulletin
| |
| StoGuard™ Tape - 269
StoGuard Tape is a self-adhering waterproof air barrier material composed of spunbond polyester fabric laminated to rubberized asphalt adhesive. It is part of the StoGuard assembly and is used on above grade vertical wall surfaces as: rough opening protection at windows, doors and other openings; waterproofing and air barrier for sheathing joints and minor cracks in concrete and CMU wall construction; secondary seal behind sealant joints; and air barrier connection material at dissimilar materials.
MSDS for StoGuard Tape - 269
Product Bulletin
| |
| Sto High-Strength Shotcrete - CR305
Sto High-Strength Shotcrete is a durable, cement-based, dry-process shotcrete mortar for structurally repairing deteriorated concrete. It has been fortified with microsilica for superior physical strengths. Use it on vertical or overhead surfaces for repairs greater than 1/2 inch (12 mm).
Material Safety Data Sheet
Product Bulletin
| |
| Sto Hot Prime® - 805
Sto Hot Prime® is used as a vertical above grade interior or exterior primer over properly prepared and cured concrete, stucco, and concrete masonry walls.
Material Safety Data Sheet
Product Bulletin
| |
| Sto HydroTight™ - 206
Sto HydroTight™ is a ready-mixed, one component, latex-based material used as a waterproofing undercoat for horizontal balconies, decks and walkways. It is designed for use as an undercoat for Sto coatings like Decocoat, Texture Coat and Protective Concrete Coating.
Material Safety Data Sheet
Product Bulletin
| |
| Sto HydroTight™ Fabric - 207
New name! Now called StoGuard Fabric 6 - 207
StoGuard™ Fabric is a 6" non-woven cloth reinforcement for use with Sto Hydrotight™ for crack bridging.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Intermediate Mesh - 918
Sto Intermediate Mesh is specially designed coated glass fiber fabrics used for impact resistance in Sto Claddings, including StoTherm™ NExT.
Material Safety Data Sheet
Product Bulletin
| |
| StoLastic Sand - 211
StoLastic Sand is an elastomeric, acrylic-based, decorative coating that weatherproofs and bridges cracks. Use it for protecting prepared vertical concrete, stucco, EIFS, masonry, or previously acrylic-coated smooth/textured surfaces. Its textured finish is sprayed or roller-applied. It is available in a variety of colors, making it an easy way to quickly improve a substrate’s appearance.
Material Safety Data Sheet
Product Bulletin
| |
| StoLastic Smooth- 212
StoLastic Smooth is an elastomeric, acrylic-based, decorative coating that weatherproofs and bridges cracks. Use it for protecting prepared vertical concrete, stucco, EIFS, masonry, or previously acrylic-coated smooth/textured surfaces. Its smooth finish is sprayed or roller-applied. It is available in a variety of colors, making it an easy way to quickly improve a substrate’s appearance.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Leveler - 244
Sto Leveler is a polymer-modified, cement-based, glass fiber-reinforced product used to patch or level irregular masonry, concrete or plaster/stucco wall surfaces. Apply the product from 1/8" to 1/4" (3-6 mm) thick.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Limestone - 158
Sto Limestone provides the classic beauty of stone in a lightweight and easily installed premium architectural wall finish. It features the look and feel of natural stone at a fraction of the expense.
Material Safety Data Sheet - see Stolit 1.0 and Stolit Freeform or Sto Powerflex Fine and Sto Powerflex Freeform
Product Bulletin
Sales Sheet
| |
| Stolit® 1.0 - 130
Stolit® 1.0 is a ready-mixed, acrylic-based, premium exterior or interior textured wall finish, enhanced with Sto Optilink® advanced polymer technology from Sto. Stolit® is used as a decorative and protective wall coating over prepared concrete, masonry and plaster substrates and in Sto Claddings, including StoTherm Classic and StoTherm Classic NExT™.
Material Safety Data Sheet
Product Bulletin
| |
| Stolit® 1.5 - 131
Stolit® 1.5 is a ready-mixed, acrylic-based, premium exterior or interior textured wall finish, enhanced with Sto Optilink® advanced polymer technology from Sto. Stolit is used as a decorative and protective wall coating over prepared concrete, masonry and plaster substrates and in Sto Claddings, including StoTherm Classic and StoTherm Classic NExT™.
Material Safety Data Sheet
Product Bulletin
| |
| Stolit® R1.5 - 141
Stolit® R1.5 is a ready-mixed, acrylic-based, premium exterior or interior textured wall finish, enhanced with Sto Optilink® advanced polymer technology from Sto. Stolit is used as a decorative and protective wall coating over prepared concrete, masonry and plaster substrates and in Sto Claddings, including StoTherm Classic and StoTherm Classic NExT™.
Material Safety Data Sheet
Product Bulletin
| |
| Stolit®- Freeform - 156
Stolit® Freeform is a ready-mixed, acrylic-based, premium exterior or interior textured wall finish, enhanced with Sto Optilink® advanced polymer technology from Sto. Stolit is used as a decorative and protective wall coating over prepared concrete, masonry and plaster substrates and in Sto Claddings, including StoTherm Classic and StoTherm Classic NExT™.
Material Safety Data Sheet
Product Bulletin
| |
| Stolit®- 1.0D - 130D
Stolit® is a ready-mixed, acrylic-based, premium exterior or interior textured wall finish, enhanced with Sto Optilink® advanced polymer technology from Sto. Stolit is used as a decorative and protective wall coating over prepared concrete, masonry and plaster substrates and in Sto Claddings, including StoTherm Classic and StoTherm Classic NExT™. Stolit D is specially formulated for tinting to dark colors.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Mesh - 920E
Sto E-Mesh is specially designed coated glass fiber fabrics used for impact resistance in Sto Claddings, including StoTherm™ NExT.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Overhead Mortar with CI - CR702CI
Sto Overhead Mortar with integral corrosion inhibitor is a single component, polymer-modified, cement-based mortar for structurally repairing deteriorated concrete.
Material Safety Data Sheet
Product Bulletin
| |
| | |
| Sto Penetrating Sealer - CR650
Sto Penetrating Sealer is a clear, siloxane-based, penetrating sealer that protects against weather, salts and environmental pollutants. Use it for protecting concrete, stucco, masonry block or brick. It can be easily sprayed on horizontal, vertical and overhead surfaces.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Plex-W - 831
Sto Plex-W is a water-based surface conditioner used for restoring absorptive or chalking vertical concrete masonry, or stucco wall surfaces. Also used for restoring chalking painted surfaces prior to re-coating.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Powercryl™ Finish - Fine - 470
Sto Powercryl™ Finish - Fine is a ready-mixed, textured wall coating used as a decorative and protective wall finish over prepared concrete, masonry and plaster/stucco substrates.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Powercryl™ Finish - Medium - 471
Sto Powercryl™ Finish - Medium is a ready-mixed, textured wall coating used as a decorative and protective wall finish over prepared concrete, masonry and plaster/stucco substrates.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Powercryl™ Finish - Swirl - 472
Sto Powercryl™ Finish - Swirl is a ready-mixed, textured wall coating used as a decorative and protective wall finish over prepared concrete, masonry and plaster/stucco substrates.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Powercryl™ Coating - 218
Sto Powercryl™ Coating is an acrylic-based interior and exterior wall coating used over prepared concrete, masonry, plaster/stucco substrates and acrylic textured coatings.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Powerflex® - Fine - 280
Sto Powerflex® Fine is a ready-mixed, elastomeric textured wall coating used as a decorative and protective wall coating over prepared concrete, masonry and plaster/stucco substrates.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Powerflex® - Medium - 281
Sto Powerflex® Medium is a ready-mixed, elastomeric textured wall coating used as a decorative and protective wall coating over prepared concrete, masonry and plaster/stucco substrates.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Powerflex® - Swirl - 282
Sto Powerflex® Swirl is a ready-mixed, elastomeric textured wall coating used as a decorative and protective wall coating over prepared concrete, masonry and plaster/stucco substrates.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Powerflex® - Freeform - 283
Sto Powerflex® Freefom is a ready-mixed, elastomeric textured wall coating used as a decorative and protective wall coating over prepared concrete, masonry and plaster/stucco substrates.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Powerflex® Silco - Fine - 285
Sto Powerflex® Silco Fine is a ready-mixed, silicone-enhanced, elastomeric textured wall coating. Sto Powerflex® Silco is used as a decorative and protective wall finish for exterior applications over prepared vertical concrete, masonry and Portland cement plaster/stucco surfaces.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Powerflex® Silco - Freeform - 288
Sto Powerflex® Silco Freeform is a ready-mixed, silicone-enhanced, elastomeric textured wall coating. Sto Powerflex® SIlco is used as a decorative and protective wall finish for exterior applications over prepared vertical concrete, masonry and Portland cement plaster/stucco surfaces.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Powerflex® Silco - Medium - 286
Sto Powerflex® Silco Medium is a ready-mixed, silicone-enhanced, elastomeric textured wall coating. Sto Powerflex® SIlco is used as a decorative and protective wall finish for exterior applications over prepared vertical concrete, masonry and Portland cement plaster/stucco surfaces.
Material Safety Data Sheet
Product Bulletin
| |
| Sto Powerflex® Silco - Swirl - 287
Sto Powerflex® |